Rywire K-series engine harness was created to facilitate a more universal chassis, and harness routing preference. This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's counterpart. This routing method is ideal for our (RHD) Right Hand Drive customers however NOT exclusive to RHD chassis and does work fine on a LHD chassis. The engine harness is also routed in a way that allows you to get around aggressive headers.
This K24z3 specific harness was created to allow the use of the newer updated plugs of the K24z3, but keep the popular 02-04 computer plugs for the Kpro and Link/AEM series 2 plug and play solutions. All Plugs on this harness are set up to plug into the K24z3 except for the ones in the list below that mention otherwise. Please note, harness pic may need updating.
These harnesses are warrantied and guaranteed to work, we provide excellent installation phone support and troubleshooting to ensure this reputation for quality, however they are non-refundable. All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations. These are the best harnesses money can buy. NO CORE is necessary when buying a harness from us! This harness follows an OEM style configuration meaning that you'll still need a interior computer plug adapter for your chassis - see the K-Series Computer Adapter link and add-option below!
K24z3 HARNESS CONNECTOR LIST:
VTEC solenoid
VTC
Oil pressure sending unit
Crank Sensor (CKP)(K24z3 style)
Coils 1-4 (K24z3 style)
Cam (CPS) Exhaust Side
Top Dead Center sensor (TDC) Intake Side
Engine Coolant Temp (ECT) (K24z3)
Knock Sensor (KS) (K24z3)
Intake Air Temperature (IAT) (K24z3 style)
Alternator (K24z3 style)
Manifold Air Pressure (MAP)
Throttle Position Sensor (TPS) (02-04 RSX)
Idle control motor (02-04 RSX)
Electronic speed sensor (VSS) DEFAULT VSS:(05-06) IN FRONT
Injectors 1-4 (K24z3)
h20 sending unit (for gauge cluster)
Reverse Lights
Reverse Lockout solenoid
Starter signal
Computer plugs A and B (02-04 RSX)
Power distribution cap
Ground
2 Extra Wires
Our K-series adapters are $329.99 and can be viewed here. (click to view)
Charge Harness: The "One Piece charge harness" option will add the Starter and Alternator wires (+$40)
VTEC Pressure Switch Plug (Plug Bolt)
Rywire Engine Ground kit with DR-25
