Home

 

OBD2 Mil-Spec D & B-Series Tucked Engine harness
Mil-Spec Tucked B-Series harness
 
Alternative Views:


Our D-series & B-Series OBD2 Mil-spec wire harness is cross-compatible with both engine types.

There are quite a few options available.
Please look through them carefully to make sure you get the right connectors!


Component Type: Select your OBD2 distributor connector type by counting the # of wire positions it has.

Fuel Injector Plug Type: (Select "NH1/HONDA OBD2" by default)
The Injector plug dropdown menu has all the options you would need if you require a different Injector type only.

Vehicle Type: Select your vehicles chassis type.
This tells us what interior "Chassis Adapter" you need.


Charge Harness:
The "1-piece charge harness" option will add the Starter & Alternator leads to the fuse box that goes through the firewall. Click here to see the "2-piece bulkhead charge harness" If you are not running your own Alternator power lead, you should add this.
If you are relocating your battery, with our Starter Fuse box lead, all you need to do is run a heavy gauge wire to the starter from your 12v+ battery terminal in order to get 12v+ power to your fuse box.


Quick Disconnect Plate: Preview in new tab.

Add Quick Disconnect Plug:This adds fire-wall separation plug and cleanly attaches with the quick disconnect plate above.

Add VTEC Pressure switch plug: This adds a bolt to put in place of the un-used VTEC Oil pressure sensor if you wish to remove it for a cleaner look.

Ground Kit: Preview in new tab.

This engine harnesses uses OBD1 (92-95) computer connectors


PRICE: $749.00



ID: B2-MILSPEC


Vehicle Type :*:


COMPONENT TYPE*:


FUEL INJECTOR PLUG TYPE (Primary)*:


CHARGE HARNESS*:


ADD QUICK DISCONNECT PLATE*:


ADD QUICK DISCONNECT PLUG*:


Quick Disconnect Plug Location :


Add VTEC Oil Press. Solenoid Bolt:


GROUND KIT:


Description
 
Our D-series & B-Series OBD2 Mil-spec wire harness is cross-compatible with both engine types.

MADE IN THE U.S.A.

This harness uses Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Standard wall ethylene-tetrafluoroehtylene (ETFE) insulation ( also known as Tefzel ) designed for aerospace applications where weight, dimensional tolerance, and mechanical durability are required. This wire exhibits high chemical and radiation resistance.
Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering.

Rywire also offers a Firewall mounted Mil-Spec connector that will allow easy engine removal for quick engine changes and customization. It can be added to any Mil-Spec wire harness.

All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations.

This engine harnesses is made with OBD1 (92-95) Computer Connectors
(For this product name, OBD2 applies to the Alternator, Distributor, and Injector connector difference)

A computer adapter can be used for OBD2 computer's if necessary however our harness does not support USDM OBD2 computer's. Aftermarket computer's using OBD2 plugs and Non-US OBD2 computer's are compatible (except for H22 and GSR stock computers).

Each harness will come with a custom back side sub-harness that will be proprietary to the chassis you choose on the drop down menu. This way if you ever change chassis you will only need a new sub-harness, not a whole new wire loom!

These harnesses are warrantied and guaranteed to work, however they are non-refundable. Because the back-side (interior/shock tower connection) separates from the main harness, the engine harness can be used on multiple chassis provided the engine itself uses the same components. We sell the back-side harness separately only over the phone for previous engine harness customers.


Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.

HARNESS CONNECTOR LIST:


Oil Pressure Sending Unit Knock Sensor Intake Air Temperature (Intake Manifold Style)
Oxygen Sensor (Primary 4 Wire) OBD2 Alternator 2 Extra Wires
OBD2 Injectors 1-4 MAP Sensor TPS (Throttle position)
Idle Control Motor Electronic Speed Sensor Ground
Fan Switch OBD2 10-pin Distributor plug
h20 Sending Unit (for Gauge Cluster)
Reverse Lights Engine Coolant Temp Starter Signal
VTEC Solenoid OBD1 Computer Plugs A,B,D Power Distribution Cap



This instruction is for an 88-91 CRX/Civic installing a Budget Tucked or Mil-spec version of the B-series, D-series, F-series & H-series Rywire engine harness "Chassis Adapter".

[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]

This instruction is for an 90-91 Integra DA installing a Budget Tucked or Mil-spec version of the B-series, D-series, F-series & H-series Rywire engine harness "CHASSIS ADAPTERS" specific to your vehicle type; But matching a wide range of our engine harnesses.

[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]

This instruction is for an 92-95 Civic & 92-95 Integra installing a Budget Tucked or Mil-spec version of the B-series, D-series, F-series & H-series Rywire engine harness “CHASSIS ADAPTERS” specific to your vehicle type.

[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]

This instruction is for an OBD2a vehicle installing a Budget Tucked or Mil-spec version of the B-series, D-series, F-series & H-series Rywire engine harness “CHASSIS ADAPTERS” specific to your vehicle type; But matching a wide range of our engine harnesses.
Note: On OBD2a Civic’s our adapter is plug and play, this isn’t needed.

[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]

This instruction is for an OBD2b vehicle installing a Budget Tucked or Mil-spec version of the B-series, D-series, F-series & H-series Rywire engine harness “CHASSIS ADAPTERS” specific to your vehicle type; But matching a wide range of our engine harnesses.

[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]

How to order Rywire Engine harness
Rywire - Injector Identification Video
"Tefzel Wiring vs Standard Wiring" w/ Andre Simon from the HPA

Accessories
Ground Kit Honda Charge Harness Rywire RyTi Titanium VTEC Solenoid Bolt
PRICE: $85.00

Add
PRICE: $65.00

Add
PRICE: $10.00

Add Free Shipping
ground kit Charge Harness Rywire RyTi Titanium VTEC Solenoid Bolt





Sign up for our newsletter to receive exclusive deals and discounts