3.5 BAR / 50 PSIa MAP Stainless Steel Sensor Kit.Stainless Steel Sensor Body. 1/8" NPT Male Thread.Includes:3.5 BAR / 50 PSIa Stainless Steel Sensor12" Flying Lead Connector1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter.All AEM Sensors include a flying lead with a weather-tight seal and 12 inch insulated wires that are color coded in black, green and red! This is important since the correct connector will give you the most accurate voltage possible.Sensor Performance Specifications:Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and LinearityOperating Temp: -40C to 105C / -40F to 221FBurst Pressure: 500PSIResponse Time: < 1mSWetted Materials: 304L & 316L Stainless SteelVibration: 100 to 2000Hz, 20g Sinusoidal, 3 AxesWeight: <85gSupply Current: <6mA at 5 VdcOutput: .5 to 4.5Vdc LinearTransfer Function: PSI = (12.5*(Voltage))-20.95Elec. Termination: Integral weatherproof connector, includes mating connector with 12" leads, 1 Red (Supply Voltage 5Vdc +/- .5), 1 Black (Ground), 1 Green (Output)Voltage Output Diagram
