NOTE: If you are going to use this harness with a different engine harness then it was intended for, you may need our Mating Deutsch Connector

This Rywire coil sub-harness is made for 4 cylinder or 2 rotor engines using the IGBT 5 wire "smart" (AEM/IGN-1A) coils. Will plug directly into our Haltech harness for the 2 rotor rotary (13B) engines.

This sub-harness is designed specifically with the 2 rotor engine in mind, it offers two 50A relays (1 relay for each rotor), 16awg tefzel power wires for each coil, separate grounds for each rotor (leading and trailing).

When using this harness with a 4 cylinder engine, simply ground both ring terminals to the engine's head. Wire signal wires into the Computer/EMS using mating 8 position Deutsch connector.

Connectors labeled L1, T1, L2, T2 Set up for leading and trailing, but can be used in a 1,2,3,4 format easily.

Features:
-HD Busman relay/fuse box
-100A relay protection
-Independent fused links
-Tefzel wire
-Raychem heatshrink tubing
-Proper wire sizes for rotary multi-spark engines

Wiring information for standalone Computer/EMS or Ignition Driver:

Brown - Coil 1

Red - Coil 2

Blue - Coil 3

Yellow - Coil 4

Black - Ground

Yellow/Black - Ignition Switch Power

Stud to battery +

This instruction diagram is for the Rywire IGBT Coil Sub-Harness

[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]

Subharnesses

Featured Products

Filters

Filters

Rywire 4-wire Oxygen Sensor (O2) Extension

OBD0 VTEC Subharness

Ground Kit

RSX/S2000 Coil harness

Rywire 2007-12 Oxygen Sensor (O2) Extension

K to B TPS/MAP sensor adapter

Rywire IGBT (AEM/IGN-1A) Coil Sub-harness

Main Relay Kill Switch Harness