Our NewL15B7 swap harness is a full replacement solution for the L series Turbo engines running the Civic SI Computers with Flashpro.
Engines range from 2017-2021 and computers from 37820-5AM-A03 through 37820-5AM-A05 should be useable. This harness is made with all black Tefzel wire, and wrapped in a high heat temp expandable loom, with white tag labels for easy installation/service.
This harness will be prewired for the following sensors. (all OEM sensors)
-Computer plug A
-Computer plug B
-DBW Throttle body
-DBW pedal (prewired for Rywire DBW pedal kit)
-Crank shaft sensor
-CAM IN/EX sensors
-VTC IN/EX solenoids
-MAF/Temp
-ECT- coolant temp
-IAT- air temp
-NC-
-AC - air con
-IPV-
-PF-
-IAT 2-
-Coil packs1-4
-Direct Injection Pump
-4 DI Injectors
-RVSL- Reverse lockout
-KS- Knock
-Alt- Alternator
-NTRL-
-Trans-
-REV-Rev lamps
-ST- Starter motor
-Grounds for head and computer
-Narrow and WB Oxygen sensors
- Oil
-ABV-
-WG- Waste gate
-Batt current sensor
-Fuse box for power (Computer/Injectors)
We will integrate to your chassis the same way we always do, with our signature chassis specific adapters. If you do not see your chassis in the list please ask us, or select the Universal race fuse box and switch panel. Our PDM race harness is also a fantastic motorsport solution.
This harness is made to run through the firewall and into the cabin on the pass side of the vehicle. We recommend mounting the computer on the pass side cabin area near the passengers feet. We designed a fuse box style option that kept the factory engine harness many many years ago, and decided a full harness was the only way to go. It was critical to get the engine computer and fuse boxes out of the engine bay, away from the heat, de-clattering the engine compartment.