Home

 

T1 Cam Trigger Kit
T1 Cam Trigger Kit


 
Alternative Views:




The use of this B-series kit allows you to change from the factory honda mag sensors in the distributor to a more precise digital signal from this sensor.


The standard kit consists of:
  • 1 Golden Eagle cam gear that's been machined & custom fit with rare earth magnets installed in it.
  • 1 Dual Pole hall sensor & it's mating connector.
  • The billet sensor bracket
  • With installation instructions.
PRICE: $519.00


ID: T1-TRIGGER-KIT

Description
 
T1 Cam Trigger Kit - B series
The use of this kit allows you to change from the factory honda mag sensors in the distributor to a more precise digital signal from this sensor.

Many aftermarket Computer's read the Hall signal much better than they do the OEM signal from the distributor. A lot of times you'll notice a smoother idle & much smoother power at high rpm. This also allows complete removal of the factory distributor when a multi channel CDI box & individual coils are used with it.

If you want to keep a single channel ignition box & the distributor, then this setup can still be used.

Another option is to use 3 wire smart coils and no CDI box. These signals are on the input side of the computer, while the ignition system is on the output. Any combination of ignition box/coils will work.

The standard kit consists of:
  • 1 Golden Eagle cam gear that's been machined & custom fit with rare earth magnets installed in it.
  • 1 Dual Pole hall sensor & it's mating connector.
  • The billet sensor bracket
  • With installation instructions.
This can not be used with a stock computer.

Accessories
RSX/S2000 Coil harness
PRICE: $225.00

Add
RSX/S2000 Coil harness





Sign up for our newsletter to receive exclusive deals and discounts