Honda/Acura Chassis Harness W/PDM System
Honda/Acura Chassis Harness W/PDM System

Alternative Views:

PRICE: $1,499.00


Switch Options:

Acknowledgement of race use item*:
Acknowledgement of race use item

Engine Harness Integration:

Gauge Cluster Integration:

Headlight Harness:

Spare Output Integration:

Taillight Harness:

This is the perfect solution for all your chassis harness needs. Our state of the art system includes:
1) Power Distribution Unit. Our solid state fuse-less system is a fully configurable 12 output systems.

2) Chassis Wiring Harness. Utilizing Deutsch connector systems.

3) Optional Front Harness. Plug and play Head lights, Indicators,Fans. ($100 extra when ordered with system)

4) Optional Rear Harness. Plug and play Tail lights, Indicators,Fuel level, Fuel pump. ($100 extra when ordered with system)

5) Optional Gauge/Cluater Harness. Plug and play Gauge cluster and Brake light switch. ($100 extra when ordered with system)

6) Optional Switch Panel. 6 switch system with mounting plate. ($100 extra when ordered with system). Ignition Switch, Start Button, Fuel Override, Fan Override, Headlights, Indicator Switches.

7) Wiring installation instruction pin-out with color and wiring schematic.

Pre-configured on this system is the following (Outputs can be re-assigned by user).

OUTPUTS (15amp):
-Hi Beam Headlights or H20 Pump
-Right and Left Indicators
-Brake Lights
-Fuel Pumps (2 outputs)
-Fans (2 outputs)
-Headlights and Taillights

INPUTS (hi or low activation):
-Master switch
-Fan switch
-Starter switch
-Brake light switch
-Headlight switch
-Fuel pump switch
-Hi Beam Headlights or H20 pump switch
-Indicators switch (Right and Left)

Also on board - included wires for:
-fuel level sender
-reverse lights
-fault indicator
-speed sensor
-charge warning
-ecu malfunction indication lamp
-low oil warning lamp
-tachometer signal
-ecu service check signal
-water gauge
-battery supply wire (to master disconnect)
-ecu memory power

PDM Specs:
-12 15amp Outputs, 10 switched inputs
-100amp max
-programmable outputs with easy to use software
-on board data logging for total and individual current draw
-compact case size 4.9"X4.4"X1.3"
-System weight ~4lbs

Harness specs:
-Harness is constructed with Tefzel wire
-Deutsch and AMP connectors for quality connections
-Easily expanded and adapted to fit different style chassis
-Made to plug into different Rywire engine harnesses, as well as used universally.
-Color coded wires make wiring into any chassis easy (plug and play options avaliable).
-Constructed with quality split sleeve wire loom allows you to re-direct circuits cleanly and easily.
-Pre-programmed and pre-assigned so no need to learn complicated logic.

***This item may have a lead time. Please email for current expected time***

Questions and Answers

Q: Is this for a street car?
A: Not really, this harness is a extremely stripped down system, not to be used with creature comforts found in a street driven, daily driver.

Q: Does this harness have AC
A: Easy answer is NO. There is no pre-wired circuits for AC.

Q: Can this harness run my power windows?
A: It can POWER your power windows, but it is not pre-wired for them. We recommend running the power windows to a fused constant power source and keeping them off the Rywire harness.

Q: Can this harness power another pump or device?
A: Yes, this harness has 12, 15Amp outputs. For example, if you only need 1 Fan, or Fuel pump, you can for example borrow that channel to power what you need. The harness is loomed with a split braid for this reason, we assume the user will re-direct some circuits.
Rywire P12 setup and Installation
Civic EG PDM Install Video

Sign up for our newsletter to receive exclusive deals and discounts