Rywire Motorsport Electronics
0 Items: $0.00
Rywire is Proud to be the USA Master dealer for Moristech Power Systems
Price: Low to High
Price: High to Low
100 per page
200 per page
400 per page
Moristech Keypad Label sheet
Keypad labels for the Moristech Keypad.
Keypad available here...
Mounting bracket for the Moristech P14 PDM System.
come with P14 PDM System***
Moristech Keypad 12
Moristech CAN Keypad.
Works with all CANopen systems.
12 buttons, with Green-Yellow-Red led's/
Fully programmable over the CAN Bus.
Button Label Sheet available here...
Moristech P14 PDM
Software Download - >
14 high side output channels. 6 x 22 Amp and 8 x 10 Amp continuous outputs.
130 Amp maximum total current recommended.
10 Switch Inputs.
Compatible with 24 volt systems.
Programmable functions including True, False, AND, OR, Flash, Pulse Train, PWM ramp,
Toggle and Set/Reset to control such things as Turning Indicators, Hazard and Emergency
2 x PWM capable outputs (1 x 22 Amp and 1 x 10 Amp)
Moristech P30 PDM
This solid state 30ch Power Distribution Module is a state of the art fuse-less system that distributes
8 20amp and 22 8amp outputs.
Comes with :
-Connector Kit w/ terminals
-Power lug and cover
*Onboard CAN BUS system communicates with 15,12, and 8 button Greyhill Keypads.
*Keypad Option is for our Greyhill 12 button keypad. You may also use 8 and 15 button Racegrade pads. Label kits are extra.
Software Download - >
All additional P30 information found here.
This pinout diagram is for the Moristech P30 PDM
[ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]
Universal 30ch Chassis Harness W/PDM System
This is the perfect solution for all your chassis harness needs. Our state of the art system includes:
1) Power Distribution Unit
. Our solid state fuse-less system is a fully configurable 30 output systems.
2) Chassis Wiring Harness
. Utilizing Deutsch connector systems.
3) CAN Keypad
with Sticker sheet
. 15 switch system with soft touch buttons, and status LED's (green,yellow,red).
4) Wiring installation instruction
pin-out with color and wiring schematic.
Pre-configured on this system is the following (Outputs can be re-assigned by user).
(8) OUTPUTS (20amp):
-Fuel Pumps (2 outputs)
-Fans (2 outputs)
(22) OUTPUTS (8amp):
-Right and Left Indicators
-Fuel Pump (lift)
-Headlights and Taillights
-Spares (a couple on each plug)
INPUTS (hi or low activation):
-Can Based Keypad
-23 Universal switched inputs
-8 20amp Outputs, 22 8amp Outputs,23 switched inputs
-programmable outputs with easy to use software
-on board data logging for total and individual current draw
-compact case size XX
-System weight ~lbs
-Harness is constructed with Tefzel wire
-Deutsch and AMP connectors for quality connections
-Easily expanded and adapted to fit different style chassis
-Can be made to plug into different Rywire engine harnesses, as well as used universally.
-Color coded wires make wiring into any chassis easy.
-Constructed with quality split sleeve wire loom allows you to re-direct circuits cleanly and easily.
-Pre-programmed and pre-assigned so no need to learn complicated logic.
Questions and Answers
Q: Is this for a street car?
A: Not really, this harness is a extremely stripped down system, not to be used with creature comforts found in a street driven, daily driver.
Q: Does this harness have AC
A: Easy answer is NO. There is no pre-wired circuits for factory AC. Will work with aftermarket AC systems easily.
Q: Can this harness run my power windows?
A: It can POWER your power windows, but it is not pre-wired for them. We recommend running the power windows to a fused constant power source and keeping them off the Rywire harness.
Q: Can Outputs be stacked together to achieve more Amps?
A: Yes, 20Amp outputs can for example be stacked to achieve 40Amps . And 8Amp can be stacked to achieve 16Amps.
Specs can be found here
Software can be found here.
Radiators / Cooling Components
Digital & Print
Sign up for our newsletter to receive exclusive deals and discounts
Login / Register
Shipping & Deliveries
Returns & Exchanges