Home
Home > Rywire Accessories
Sort By:
Page of 1
Large Rywire Banner Sticker Rywire x Downstar Skate Deck (Bundle) K-Series MOTEC Stand Alone Engine Harness

Large banner size Rywire sticker.


Dimensions: 20"L x 4H"

This collaboration between Rywire and Downstar Skate came to fruition based on Frank and Ryan's connection with the TV show Seinfeld. In the later seasons of Seinfeld this 1990 (Y-49 yellow) CRX can be seen as the "outside Jerry's apartment" view countless times. Frank and Ryan's inside jokes became more and more Seinfeld focused, and it was only right that their first collab drop be themed accordingly. The fuzzy blur of this image takes us back to the 90's when tube TV's and rabbit ears were more common. Seinfeld is known to drop car cameos, and seeing the newest of the day 911, NSX, or CRX was a common sighting. This skate graphic will be more focused to the "if you know, you know" crowd, and the slightly older (more civilized) generation.

The Rywire K-Series Motec engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!

If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Motec M130 EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.

Pre-terminated for:

COMPUTER Plug Selections: Motec M130 Default

Programming Cable Ethernet, or UBS depending on computer choice

Lambda/ Uego Bosch 4.9 LSU Wideband O2 sensor, Lambda over CAN, (Depends on computer chosen)

AIR TEMP AEM (AEM Part 30-2014)

OIL TEMP AEM (AEM Part 30-2013)

Fuel Pressure AEM (AEM Part 30-2130-100)

Oil Pressure AEM (AEM Part 30-2130-150)

Exhaust Backpressure (EMAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Throttle Position (TPS) Factory Honda K series

Coolant Sensor (ECT) Factory Honda K series

VTEC Factory Honda (2002+)

Speed Sensor (VSS Hydro) Factory Honda K series

Reverse Lights Factory Honda (2002+)

Starter Trigger Factory Honda

Coils Factory Honda K-series (Smart Coils)

Ground Ring Terminals for Coils and Computer Factory Honda

Knock Sensor Bosch 0261231188 (2 wire EV1)

Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)

Injectors (8 Injector) Bosch EV14 Default (ID 1050X)

Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin

FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.

12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs)
5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)

Trigger (CAM/CRANK) K series RSX (2002+)

DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal

CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)

Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.

K-Series Haltech Engine Harness K-Series LINK Engine Harness K2 Emtron KV8 Engine Harness

The Rywire K-Series Haltech engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!

If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Haltech Elite EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.

Pre-terminated for:

COMPUTER Plug Selections: Haltech Elite 1000+

Programming Cable Ethernet, or UBS depending on computer choice

Lambda/ Uego
Bosch 4.9 LSU Wideband O2 sensor, Lambda over CAN, (Depends on computer chosen)

AIR TEMP AEM (AEM Part 30-2014)

OIL TEMP AEM (AEM Part 30-2013)

Fuel Pressure AEM (AEM Part 30-2130-100)

Oil Pressure AEM (AEM Part 30-2130-150)

Exhaust Backpressure (EMAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Throttle Position (TPS) Factory Honda K series

Coolant Sensor (ECT) Factory Honda K series

VTEC Factory Honda (2002+)

Speed Sensor (VSS Hydro) Factory Honda K series

Reverse Lights Factory Honda (2002+)

Starter Trigger Factory Honda

Coils Factory Honda K-series (Smart Coils)

Ground Ring Terminals for Coils and Computer Factory Honda

Knock Sensor Bosch 0261231188 (2 wire EV1)

Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)

Injectors (8 Injector) Bosch EV14 Default (ID 1050X)

Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin

FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.

12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs)
5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)

Trigger (CAM/CRANK) K series RSX (2002+)

DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal

CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)

Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.

The Rywire K-Series LINK G4 engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!

If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Link G4 EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.

Pre-terminated for:

COMPUTER Plug Selections: Link G4

Programming Cable Ethernet, or UBS depending on computer choice

Lambda/ Uego
Bosch 4.9 LSU Wideband O2 sensor, Lambda over CAN, (Depends on computer chosen)

AIR TEMP AEM (AEM Part 30-2014)

OIL TEMP AEM (AEM Part 30-2013)

Fuel Pressure AEM (AEM Part 30-2130-100)

Oil Pressure AEM (AEM Part 30-2130-150)

Exhaust Backpressure (EMAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Throttle Position (TPS) Factory Honda K series

Coolant Sensor (ECT) Factory Honda K series

VTEC Factory Honda (2002+)

Speed Sensor (VSS Hydro) Factory Honda K series

Reverse Lights Factory Honda (2002+)

Starter Trigger Factory Honda

Coils Factory Honda K-series (Smart Coils)

Ground Ring Terminals for Coils and Computer Factory Honda

Knock Sensor Bosch 0261231188 (2 wire EV1)

Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)

Injectors (8 Injector) Bosch EV14 Default (ID 1050X)

Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin

FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.

12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs)
5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)

Trigger (CAM/CRANK) K series RSX (2002+)

DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal

CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)

Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.

The Rywire K-Series Emtron KV8 engine harness is a universal race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!

If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Emtron EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.

Pre-terminated for:

COMPUTER Plug Selections: Emtron KV8

Programming Cable Ethernet, or UBS depending on computer choice

Lambda/ Uego Bosch 4.9 LSU Wideband O2 sensor, Lambda over CAN, (Depends on computer chosen)

AIR TEMP AEM (AEM Part 30-2014)

OIL TEMP AEM (AEM Part 30-2013)

Fuel Pressure AEM (AEM Part 30-2130-100)

Oil Pressure AEM (AEM Part 30-2130-150)

Exhaust Backpressure (EMAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Throttle Position (TPS) Factory Honda K series

Coolant Sensor (ECT) Factory Honda K series

VTEC Factory Honda (2002+)

Speed Sensor (VSS Hydro) Factory Honda K series

Reverse Lights Factory Honda (2002+)

Starter Trigger Factory Honda

Coils Factory Honda K-series (Smart Coils)

Ground Ring Terminals for Coils and Computer Factory Honda

Knock Sensor Bosch 0261231188 (2 wire EV1)

Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)

Injectors (8 Injector) Bosch EV14 Default (ID 1050X)

Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin

FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.

12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs)
5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)

Trigger (CAM/CRANK) K series RSX (2002+)

DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal

CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)

Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.
K Series FuelTech Engine Harness K Series Syvecs S7 Engine Harness

**PLEASE NOTE:

- THESE HARNESSES ARE PRIMARILY EQUIPPED FOR THE FT550 & FT600; IF YOU'RE USING AN FT450 YOU WILL HAVE A LOT OF EXTRA CONNECTORS THAT WILL NOT BE USED.**

The Rywire K-Series FuelTech 550 engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!

If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Fueltech EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.

Pre-terminated for:

COMPUTER Plug Selections: Fueltech 550

Programming Cable Ethernet, or UBS depending on computer choice

Lambda/ Uego
FuelTech computers require a NANO wideband unit with wire harness. Our powered CAN plug can interface with the NANO subharness quite easily.

AIR TEMP AEM (AEM Part 30-2014)

OIL TEMP AEM (AEM Part 30-2013)

Fuel Pressure AEM (AEM Part 30-2130-100)

Oil Pressure AEM (AEM Part 30-2130-150)

Exhaust Backpressure (EMAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Throttle Position (TPS) Factory Honda K series

Coolant Sensor (ECT) Factory Honda K series

VTEC Factory Honda (2002+)

Speed Sensor (VSS Hydro) Factory Honda K series

Reverse Lights Factory Honda (2002+)

Starter Trigger Factory Honda

Coils Factory Honda K-series (Smart Coils)

Ground Ring Terminals for Coils and Computer Factory Honda

Knock Sensor Bosch 0261231188 (2 wire EV1)

Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)

Injectors (8 Injector) Bosch EV14 Default (ID 1050X)

Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin

FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.

12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs)
5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)

Trigger (CAM/CRANK) K series RSX (2002+)

DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal

CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)

Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.

The Rywire K-Series Syvecs S7 engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!

If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Syvecs EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.

Pre-terminated for:

COMPUTER Plug Selections: Syvecs S7

Programming Cable Ethernet, or UBS depending on computer choice

Lambda/ Uego
Bosch 4.9 LSU Wideband O2 sensor, Lambda over CAN, (Depends on computer chosen)

AIR TEMP AEM (AEM Part 30-2014)

OIL TEMP AEM (AEM Part 30-2013)

Fuel Pressure AEM (AEM Part 30-2130-100)

Oil Pressure AEM (AEM Part 30-2130-150)

Exhaust Backpressure (EMAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)

Throttle Position (TPS) Factory Honda K series

Coolant Sensor (ECT) Factory Honda K series

VTEC Factory Honda (2002+)

Speed Sensor (VSS Hydro) Factory Honda K series

Reverse Lights Factory Honda (2002+)

Starter Trigger Factory Honda

Coils Factory Honda K-series (Smart Coils)

Ground Ring Terminals for Coils and Computer Factory Honda

Knock Sensor Bosch 0261231188 (2 wire EV1)

Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)

Injectors (8 Injector) Bosch EV14 Default (ID 1050X)

Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin

FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.

12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs)
5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)

Trigger (CAM/CRANK) K series RSX (2002+)

DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal

CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)

Chassis adapter options

This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm

This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.

This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANEL
http://www.rywire.com/product-p/ry-switch-6.htm

The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!

MADE IN THE U.S.A.
   
 




Sign up for our newsletter to receive exclusive deals and discounts